The ALTERNATIVE

Go to: Shipbuilding & repair
Go to: Metal structures for oil and gas production

To request comparative thermal and aerodynamic calculation

logotip

INPUT DATA FOR A COMPARATIVE CALCULATION

  • You receive the information. Our experts will contact you in the near future.

Your name & surname:_
Occupation:_
Company:_
Address:_
E-MAIL:_
Tel./fax:_
Boiler type, station namber:_
RAH type:_
Equivalent diameter of the
hot-end profile, mm:_
Equivalent diameter of the
cold-end profile, mm:_
The hot-end profile`s
height, m:_
The cold-end profile`s
height, m:_
Hot-end heating surface, m2:_
Cold-end heating surface, m2:_
Fuel type:_
Fuel caloricity:_
Fuel occurrence:_
Gas temperature at RAH
inlet, °C:_
Air temperature at RAH
inlet, °C:_
Gas temperature at RAH
outlet, °C:_
Air temperature at RAH
outlet °C:_
RAH resistence along the gas side, mm of a water column:_
RAH resistence along the air side, mm of a water column:_
Fuel consumption, kg/sec:_
Steam capacity, ton/hour:_
Air inflow into the furnace:_
Air inflow in RAH:_
Air inflow in the
coal-preparation system
(only for «coal-fuel» station):_
Air surplus coefficient at the furnace outlet:_
Mean coefficient of air surplus in RAH:_

Text:_
 
EnSERTIKO


The production is certified
in EnSERTIKO system

Figures showing your boilers functioning
after installation of the profiles made by us
will tell you more than you can hear now.
| Main | About company | What is a regenerative air heater? | Manufacture of heat exchange | Tests results | Short information on manufacture | Certification |
| Economy and ecology | References | Requisites | Send e-mail |

2005-2013 Northern Interindustry Company The Alternative